SGMo Copper coated 0,5% Mo low alloy Wire for GMAW

SGMo Copper coated solid wire, for MIG welding of low alloy high tensile steels and creep resistant steels up to 450° C of the 0,5% Mo type, used in thermal power plant and petrochemical applications.
Suitable also for surfacing on casting and for casting repairs.
Suitable for heat resisting steels, such as plate ASTM 204 e pipe A335-P1 or casting with same composition.
Shielding gas Ar/CO2 Mix or CO2.
Available in diam. 1.0, 1.2 mm. In 15 kgs steel spool, with precision winding

Typical Wire Analysis%:
C 0.08-0.12, Mn 0.90-1.3, Si 0.30-0.70, P 0.020, S 0.020, Mo 0.40-0.60, Ni 0.15, Cu 0.30

Shielding Gas: 75%Ar/25%CO2
Typical Mechanical Properties:
Tensile strength: AW >560 MPa - SR > 515 MPa
Yield strength: AW >460 MPa - SR > 400 MPa
Elongation E 5d%: AW >22 - SR >19
Charpy V-Notch Impact Properties:
Testing Temp. 20° C AW >47J - SR >47J
(AW= As Welded, SR= Stress Relieved at 620° C x 1h)

The above data may change without prior notice.