Filler Metal SIDER 316LSi features a higher silicon content which delivers smooth bead appearance and good wetting action. SIDER 316LSi is used for welding type 316 and 316L stainless steel. This wire contains molybdenum, which resists pitting corrosion induced by sulphuric and sulphurous acids, chlorides and cellulose solutions and offers improved corrosion and pitting resistance in marine and industrial environments.
Available in diam.: 0.8 - 1 - 1.2 - 1.6 mm; on spools of 15 kgs:
Available in diam.: 0.6 - 0.8 - 1 mm; on spools of 5 kgs:
Available in diam.: 0.8 - 1 - 1.2 mm; on spools of 1 kgs:
(This item is subject to Industry Alloy Surcharges)
Shielding Gas 100% Ar or Argon/2% O2. -18·20 lit / min
Typical Mechanical Properties
Tensile strength: 580 MPa (85,000 psi)
Yield strength: 450 MPa (65,000 psi)
Elongation: 38%
Typical Chemical Analysis %
C 0.02, Mn 1.80, Si 0.85, Cr 18.50, Ni 12.50, Mo 2.60, Ferrite 8 FN
Element | Value |
---|---|
C | 0,02 |
Cr | 18,50 |
Ni | 12,50 |
Mo | 2,60 |
Mn | 1,80 |
Si | 0,85 |
Item | Sizes | Packaging |
---|