ALLOY 59 Tig Welding Rods Filler Metal
Filler Metal ALLOY 59 is a nickel-chromium-molybdenum alloy with low carbon and silicon contents, is used for gas-tungsten-arc, gas-metal-arc, and submerged-arc welding (GTAW/GMAW/SAW).It offers excellent corrosion resistance, high mechanical strength and better thermal stability. Because of its low silicon and carbon contents and no tungsten, ALLOY 59 is no prone to grain-boundary precipitation during hot forming and welding.
APPLICATIONS: ALLOY 59 is well suited for welding in a wide variety of chemical processing facilities in both oxidizing and reducing media.
This alloy is used to weld low-carbon-nickel-chromium-molybdenum alloys, for welding the clad side of joints in steel clad with low-carbon-nickel-chromium-molybdenum alloys, and for welding low-carbon-nickel-chromium-molybdenum alloys to steel and to other nickel-base alloys, such as alloys C-276, 22, 625 and other high alloys such as 6Mo stainless, 825 and even common grades of stainless steels.
Some typical base metals that this alloy is used on are: ASTM S34565 (4565), NO8926 (22-25-6), S31254 (654SMO, 254SMO) and ASME B and SB 574, 575, 619, 622 and 626.
This wire provides exceptional weldability and very low sensitivity to hot cracking.
Minimum Mechanical Properties:
Tensile strength: MPa 700 (psi 101,500)
Yield strength: MPa 400 (psi 58,000)
Elongation: 30%
Filler metals available on spool and in cut straight lengths in a variety of sizes and diameters.
AWS A5.14: ERNiCrMo-13 - (UNS N06059)
Chemical analysis
| Element | Value |
|---|---|
| Cr | 23,0 |
| Ni | 59,0 |
| C | 0,005 |
| Fe | < 1,0 |
| Mo | 16,0 |
| Si | <0.01 |
| Al | 0.2 |
| Mn | 0.3 |
Packaging
| Item | Packaging |
|---|
Print