ALLOY 82 Wire and Strip for SAW

ALLOY 82 Wire and Strip for SAW

Filler Metal 82 is used for submerged-arc welding of INCONEL® alloys 600, 601 and 690, INCOLOY® alloys 800 and 800HT, and INCOLOY® alloy 330. It is also used for surfacing and cladding of steel, and for submerged arc groove welding. For submerged-arc welding and surfacing and cladding with this Alloy use a suitable flux.
Weld metal deposited by Filler Metal 82 has high strength and good corrosion resistance, including oxidation resistance and creep-rupture strength at elevated temperatures.
Dissimilar-welding applications include joining INCONEL® alloys, INCOLOY® alloys and INCOLOY® alloy 330 to nickel, MONEL® alloys, stainless steels, and carbon steels. It is also used to join stainless steels to nickel alloys and carbon steels.

Typical Mechanical Properties:
Tensile Strength: MPa 552 (psi 80,000)
Elongation, (4d) % 30

Filler metals wires and strips are available on spools or in coils and in a variety of diameters and sizes.
AWS A5.14 ERNiCr-3 (UNS N06082)
AWS A5.14 EQNiCr-3
(EN) ISO 18274 - S Ni6082 (NiCr20Mn3Nb)
Chemical analysis
Element Value
Cr 18-22
Ni 67 min
C 0,1 max
Mn 2,5-3,5
Si 0,50 max
Fe 3,0 max
Cu 0,50 max
Ti 0,75 max
Nb 2,0-3,0

Item Packaging
As Required