ALLOY G 30 Wire for SAW
Filler Metal Alloy G-30 is used for submerged arc welding of G-30® alloy. Alloy G-30 is also used for welding 6-7 molybdenum-bearing stainless steels and duplex grades including 2507.The alloy has many applications in phosphoric and nitric acid production, as well as, pulp and paper fabrications.
Alloy G-30 is considered an overmatching filler metal for the 6-7 molybdenum bearing stainless grades and also the duplex grades, including 2507
Typical Mechanical Props.
Tensile strength: MPa 690 (psi 100,000)
Filler metals wires and strips are available on spools or in coils and in a variety of diameters and sizes.
AWS A5.14 - ERNiCrMo-11 - (UNS 06030)
Chemical analysis
| Element | Value |
|---|---|
| Ni | 43,0 |
| Cr | 30,0 |
| Fe | 15,0 |
| Mo | 5,5 |
| W | 2,5 |
| Co | 5,0 |
| Cu | 2,0 |
| Cb | 1,5 |
| Mn | 1,5 |
| Si | 1,0 |
| C | 0,03 |
Mechanical properties
| Tipo | Value |
|---|---|
| As per related flux |
Packaging
| Item | Packaging |
|---|
Print