MENU
SIDER 410 Stainless Steel SAW Wire

SIDER 410 Stainless Steel SAW Wire

Filler metal SIDER 410 is a 12% chromium alloy, is an air-hardened steel.
This wire requires preheat and post heat treatments to achieve welds of adequate ductility for many engineering purposes.
Filler metal SIDER 410 is generally used for welding alloys of similar composition, SIDER 410 is also utilized for deposition of overlays on carbon steel to resist corrosion, erosion and abrasion.
Available in diam.: 2.0-2.4-3.2-4.0 mm; on spools of 25 kgs:
(This item is subject to Industry Alloy Surcharges)

Typical Mechanical Properties
Tensile strength: 830 MPa (120,000 psi)
Elongation: 22%
Typical Chemical Analysis %
C 0.05, Cr 13.5, Ni 0.30, Mo 0.20, Mn 0.40, Si 0.30
AWS A5.9 ER410 (UNS 41080)
Ask
Print