ALLOY 65 Tig Welding Rods Filler Metal
Filler Metal Alloy 65 is used for gas-tungsten-arc welding of INCOLOY alloy 825 and other nickel-iron-chromium-molybdenum-copper alloys of similar composition.The weld metal is highly corrosion resistant, particularly in reducing chemicals such as sulphuric and phosphoric acids.
Filler Metal Alloy 65 can also be used for depositing overlays on carbon and low alloys steels.
Minimum Mechanical Properties:
Tensile Strength: MPa 552 (psi 80,000)
Elongation, (4d) % 25
Filler metals available on spool and in cut straight lengths in a variety of sizes and
AWS A5.14: ERNiFeCr-1 -(UNS N08065)
Chemical analysis
| Element | Value |
|---|---|
| Ni | 38-46 |
| C | 0,05 max |
| Mn | 1,0 max |
| Si | 0,75 max |
| Fe | 22,0 min |
| Cu | 1,5-3,0 |
| Ti | 0,6-1,2 |
| Al | 0,2 max |
| Cr | 19,5-23,5 |
| Mo | 2,5-3,5 |
Packaging
| Item | Packaging |
|---|
Print