MENU
SIDER 317L Stainless Steel SAW Wire

SIDER 317L Stainless Steel SAW Wire

Filler Metal SIDER 317L is recommended for welding type 317 and 317L stainless steel to give a maximum of 0.04% Carbon in the weld deposit.
The wire´s low carbon content reduces the possibility of intergranular carbide precipitation and increases the resistance to intergranular corrosion.
The higher molybdenum content, as compared to type 316L, further reduces susceptibility to pitting corrosion.
Filler Metal SIDER 317L is used in the pulp and paper industry, food processing facilities, chemical processing plants, in marine environments and in other severe corrosion applications involving sulfuric and sulfurous acids and their salts.

Available in diam.: 2.0, 2.4, 3.2, 4.0 mm; on spools of 25 kgs:
(This item is subject to Industry Alloy Surcharges)

Typical Mechanical Properties
Tensile strength: 620 MPa (90,000 psi)
Yield strength: 480 MPa (70,000 psi)
Elongation: 35%

Typical Chemical Analysis%
C 0.03*, Mn 1.5, Si 0.40, Cr 19.0, Ni 14.0, Mo 3.50, Cu 0.25, Ferrite 9 FN (*)max.
AWS A5.9 ER317L (UNS W31783)
Ask
Print