SIDER 4122 Martensitic Stainless Steel Mig wire for welding alloys of similar composition and for wear and corro¬sion resistant hardfacings.
Application field:
SIDER 4122 is suitable for high-grade buildups on non-and low alloyed base steels / kinds of steel and tool steels.
Application fields are sealing faces on fittings, plungers and claddings on rotors.
The martensitic welding deposit has a high wear resistance also at elevated temperatures as well as a good resistance against water, steam and diluted organic acids. Scale resistant up to 900° C.
Welding instruction:
Clean welding area to metallic bright.
Preheating temperature 150 - 400° C, depending on the size of the work piece and the base material. Slow cooling and, if necessary, tempering.
Shielding gas : 100% Ar or Argon+2% O2 - 18·20 lit / min
Hardness of the pure weld deposit: 48-52 HRC
Wire Chemical Analysis in %:
C 0.33/0.45, Si 0.40/1.0, Mn 0.5/1.5, Cr 15.5/17.5, Mo 0.8/1.3, Ni 0.50/1.0, Fe balance
Available in diam.: 1.2 mm; on spools of 15 kg.
Item | Sizes | Packaging |
---|