SIDER FLUX F500 SAW flux for Stainless Steel and Duplex Stainless Steel welding
SIDER FLUX F500 is a basic non-alloying bonded flux suitable for welding stainless and duplex stainless steels.SIDER FLUX F500 offers superior performance for both joining & cladding of austenitic stainless steel with or without Nb-stabilization & duplex stainless steels.
It provides excellent slag removal also in narrow V-joints.
It can be used for single and multipass welding in butt weld, fillet weld and overlay.
It allows high welding speed on thin thicknesses in single or multipass.
Welding Current: DC or AC (DC Constant Voltage for low current use)
Application:
Food Industry, Process Industry, Pipeline, General Fabrication, Chemical and Petrochemical applications, Pressure vessel, Rail Road Car, Power Generation
Available in 25 kgs bag
Flux Chemical Main Composition:
CaO+CaF2+MgO=54
Al2O2=37
SiO2=7
Basicity Index: 2.2
SIDER 308L
Typical Mechanical Properties (As Welded)
C 0.03, Mn 1.40, Si 0.60, Cr 20.0, Ni 10.0, Cu 0.35, S 0.030, P 0.030
Typical Mechanical Properties (As Welded)
Tensile Strength 560 MPa
Yield Strength 400 MPa
Elongation in 2" 38 %
CVN temp. 20°C 100 J
CVN temp.-196°C 40 J
SIDER 309L
Typical Chemical Properties (As Welded)
C 0.03 Mn 1.20, Si 0.60, Cr 24.0, Ni 12.50, Cu 0.50, S 0.030, P 0.030
Typical Mechanical Properties (As Welded)
Tensile Strength 570 MPa
Yield Strength 430 MPa
Elongation in 2" 33 %
CVN temp. -60°C 70 J
SIDER 316L
Typical Chemical Properties (As Welded)
C 0.03, Mn 1.40, Si 0.60, Cr 18.50, Ni 11.50, Mo 2.7, Cu 0.35, S 0.030, P 0.030
Typical Mechanical Properties (As Welded)
Tensile Strength 565 MPa
Yield Strength 400 MPa
Elongation in 2" 42 %
CVN temp. -196°C 40 J
SIDER 347
Typical Chemical Properties (As Welded)
C 0.08, Mn 1.4, Si 0.65, Cr 19.2, Ni 10.30, Nb 0.6, Cu 0.35, S 0.030, P 0.030
Typical Mechanical Properties (As Welded)
Tensile Strength 520 MPa
Yield Strength 430 MPa
Elongation in 2" 30 %
CVN temp. -196°C 35 J
SIDER 309LMo
Typical Chemical Properties (As Welded)
C 0.03, Mn 1.20, Si 0.65, Cr 24.0, Ni 12.50, Mo 2.6, Cu 0.35, S 0.030, P 0.030
Typical Mechanical Properties (As Welded)
Tensile Strength 550 MPa
Yield Strength 400 MPa
Elongation in 2" 30 %
CVN temp. -60°C 70 J
SIDER 2209
Typical Chemical Properties (As Welded)
C 0.03, Mn 2.0, Si 0.8, Cr 22.5, Ni 8.5, Mo 3.0 N 0.12, Cu 0.35, S 0.030, P 0.030
Typical Mechanical Properties (As Welded)
Tensile Strength 740 MPa
Yield Strength 570 MPa
Elongation in 2" 26 %
CVN temp. -50°C 60 J
Re-baking performed at 350°C for two hours in a vented oven, on metal trays with a maximum flux depth on the tray of 2" (50mm).
EN 760 S A FB2 53 AC
Print